Vehicle Detectors

Detector and Loop Bundles

Vehicle Detector and Preformed Direct-Burial LoopLearn More

610 Loop Vehicle Detector + Preformed Loop

The Marsh Loop Vehicle Detector and the Marsh Preformed Direct Burial Loop are the perfect choice for drive-thru installations that haven't poured paving material. The loop, which has its narrow ends encased in PVC tubing for easier installation, comes in a dozen different sizes and your choice of four lead-in lengths. Starts at $303 with free ground shipping in the U.S.


Vehicle Detector and Preformed Saw-Cut Loop Kit Learn More

610 Loop Vehicle Detector + Saw-Cut Loop Kit

If you've already installed the pavement at your drive-thru site, the Marsh Loop Vehicle Detector and the Marsh Preformed Saw-Cut Loop Kit are the perfect choice. The loop consists of multiple turns of wire bundled together in any of a dozen loop sizes. Includes one or two tubes of sealant (depending upon the size of the loop). Starts at $309 with free ground shipping in the U.S.


Individual Components

Loop Vehicle DetectorLearn More

610 Loop Vehicle DetectorThe Marsh Loop Vehicle Detector is designed to accommodate numerous applications and intelligently adjust to environmental conditions, virtually eliminating false detection. It is intended to be connected to a loop such as our Direct Burial Loop or Preformed Saw-Cut Loop or Loop Kit. Price: $169 with free ground shipping in the U.S.


Emergency Drive-Thru SystemLearn More

The Marsh Emergency Drive-Thru System

This "system in a box" will save the day of your drive-thru ordering system goes down. When service is interrupted, simply place the base station on the counter at the drive-thru window and hook the outdoor speaker on the menu board. Run the provided 125-foot audio cable between both units and plug the transformer into a wall outlet. Complete the installation by placing the 15-foot-long air detector hose over the driveway in front of the menu board, and you're back in business. Setup takes less than 10 minutes. Price: $620 with free ground shipping in the U.S.


Air Hose Vehicle Detector Learn More

Air Hose Vehicle Detector

The Marsh Air Hose Vehicle Detector is a low-cost, easy-to-install vehicle detection alternative for low-traffic applications. Simply attach the 10-foot air hose to the air switch enclosure at one end, lay the hose across the driving lane and fasten the hose detector at the other end. The air pressure switch is packaged in a weather-resistant metal housing that can be mounted to a flat surface. Price $120 with free ground shipping in the U.S.


Loop Extension CableLearn More

100 feet of Loop Extension Cable

This 100-foot length of #16 awg cable is used to extend the distance between a loop and a vehicle detector. Price: $89 with free ground shipping in the U.S.